Tool and Die Makers
Occupation · SOC 2018 51-4111 · United States
- SOC 2018 code
- 51-4111
- Share of U.S. applications
- 0.00%
- Applications on record
- 129
- FY2025
- 13
- Certified (last three years)
- 90.0%
- Main route
- PERM labour certification
Year by year
Data as at 30 Jun 2026
OC<USATOOL<AND<DIE<MAKERS<<<<<<<<<<<<<<<<<<< 5141113<N1299<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<2
Applications year by year
Labor condition, PERM and H-2 applications classified as Tool and Die Makers (SOC 51-4111). Older SOC codes are mapped to SOC 2018.
Applications by fiscal year — Tool and Die Makers
Data table
| FY2008 | 8 |
| FY2009 | 5 |
| FY2010 | 8 |
| FY2011 | 5 |
| FY2012 | 10 |
| FY2013 | 2 |
| FY2014 | 3 |
| FY2015 | 7 |
| FY2016 | 8 |
| FY2017 | 7 |
| FY2018 | 7 |
| FY2019 | 10 |
| FY2020 | 8 |
| FY2021 | 3 |
| FY2022 | 6 |
| FY2023 | 5 |
| FY2024 | 3 |
| FY2025 | 13 |
| FY2026* | 11 |
| Fiscal year | H-2B | LCA | PERM |
|---|---|---|---|
| FY2026* | 0 | 0 | 11 |
| FY2025 | 1 | 0 | 12 |
| FY2024 | 0 | 2 | 1 |
| FY2023 | 0 | 2 | 3 |
| FY2022 | 1 | 0 | 5 |
| FY2021 | 0 | 0 | 3 |
| FY2020 | 0 | 0 | 8 |
| FY2019 | 0 | 0 | 10 |
| FY2018 | 1 | 0 | 6 |
| FY2017 | 0 | 0 | 7 |
| FY2016 | 0 | 1 | 7 |
| FY2015 | 0 | 0 | 7 |
| FY2014 | 0 | 1 | 2 |
| FY2013 | 0 | 1 | 1 |
| FY2012 | 0 | 4 | 6 |
| FY2011 | 0 | 3 | 2 |
| FY2010 | 0 | 2 | 6 |
| FY2009 | 0 | 0 | 5 |
| FY2008 | 0 | 0 | 8 |
Source: U.S. Department of Labor, Office of Foreign Labor Certification — disclosure data FY2008–FY2026 Q3Data as at 30 Jun 2026
Largest sponsoring employers
Employers with the most applications in this occupation, all years.
- Drive Automotive Industries of America, Inc.9
- Chemplast, Inc.7
- Prince Metal Stampings USA, Inc.7
- Kamtek Inc.5
- ArtiFlex Manufacturing, LLC5
- Schaeffler Group USA, Inc.5
- Sewon America, Inc.3
- New Process Steel, LP2
- Trim-lok, Inc.2
- Hengst of North America, Inc.2
Source: U.S. Department of Labor, Office of Foreign Labor Certification — disclosure data FY2008–FY2026 Q3Data as at 30 Jun 2026
Where the jobs are
Worksite state and metropolitan area (Census CBSA).
Tool and Die Makers: applications by worksite state
1+2+3+6+9+
1+2+3+6+9+
Data table
| State | Applications |
|---|---|
| AL | 21 |
| SC | 17 |
| CA | 13 |
| TX | 10 |
| OH | 9 |
| MA | 8 |
| PA | 7 |
| GA | 6 |
| TN | 6 |
| NJ | 5 |
| FL | 4 |
| MI | 4 |
| NV | 3 |
| NY | 3 |
| IL | 3 |
| KY | 3 |
| CT | 2 |
| MS | 2 |
| WI | 1 |
| IA | 1 |
| NC | 1 |
Source: U.S. Department of Labor, Office of Foreign Labor Certification — disclosure data FY2008–FY2026 Q3Data as at 30 Jun 2026
Pay
Offered annual wages on certified labor condition applications, FY2024–FY2026.
- Tool & Die Maker3
- Senior Scientific Technician2
- Tool and Die Maker2
- Tool Maker2
- Senior Tool Maker2
- Engineering Specialist (tool & Die Maker & Designe1
- Tool and Die Specialist IV1
- Tool & Die Maker and Designer1
Source: U.S. Department of Labor, OFLC — Labor Condition Application disclosure dataData as at 30 Jun 2026
Official data, not advice. Visa Atlas publishes figures from government registers and statistics. It does not assess eligibility or give immigration advice; for advice, consult a regulated adviser. Read more